Manual Operation - Buick Enclave 2008 Owner's Manual

O (On/Off): Press this button to turn off the climate
control system. Outside air still enters the vehicle, and is
directed to the floor. This direction can be changed by
pressing the mode button. Recirculation can only be
selected in vent or bi-level mode. The temperature can
also be adjusted using either temperature button. If you
adjust the air delivery mode or temperature settings with
the system off, the display comes on briefly to show the
settings and then turns off. Press the on/off button or the
up down arrows on the fan switch, the defrost button,
AUTO button, or the air conditioning button to turn the
system on when it is off.

Manual Operation

The air delivery mode or fan speed can be manually
adjusted.
DC
(Fan): The buttons with the fan symbols let you
manually adjust the fan speed. Press the up arrow
to increase fan speed and the down arrow to decrease
fan speed.
Pressing a fan button while the system is off will turn
the system on. Pressing a fan button while in automatic
control places the fan under manual control. The fan
setting remains displayed and the AUTO button
light turns off. The air delivery mode remains in
automatic control.
yN z
(Mode): Press the mode up and down
buttons to manually change the direction of the airflow
in the vehicle. Repeatedly press the button until the
desired mode appears on the display. Pressing a mode
button while the system is off will change air delivery
mode without turning the system on. Pressing one
of these buttons while in automatic control to place
the mode under manual control.
The air delivery mode setting displays and the AUTO
button light turns off. The fan remains under automatic
control.
H
(Vent): This setting delivers air to the instrument
panel outlets.
)
(Bi-Level): This mode directs air to the instrument
panel outlets and to the floor outlets. A little air is directed
towards the windshield and side window outlets. Cooler
air is directed to the upper outlets and warmer air to the
floor outlets.
6
(Floor): This mode directs most of the air to
the floor outlets, with some of the air directed to the
windshield, side window outlets, and second row
floor outlets. In this mode, the system automatically
selects outside air. Recirculation cannot be selected
in floor mode.
3-25