Antenna Interface On Terminal - KVH Industries FleetBroadband FB250 Installation Manual

Chapter 4: Hardware interfaces

4.2 Antenna interface on terminal

4.2.1 Overview
The antenna interface on the terminal connects to the FB500 antenna in the
TracPhone FB500 system or to the FB250 antenna in the TracPhone FB250
system.
The antenna connector on the terminal is a TNC female connector placed in
the connector panel.
For information on cables and how to install and connect the antenna, see
Installing the antenna on page 22.
4.2.2 Pin-out
The below drawing shows the TNC female connector in the terminal.
66
Signal
GND
Antenna interface on terminal