Installing the system
2.1 Unpacking
Unpack your TracPhone system and check that the following items are
present:
•
TracPhone terminal or TracPhone 19" Rack Terminal
•
TracPhone FB500 antenna orTracPhone FB250 antenna
•
IP Handset & Cradle, wired
•
Basic cable support kit including an I/O connector, or
for 19" rack version: Strain Relief Bracket
•
Power cable
•
Antenna cable
•
LAN cable
•
User manual
•
Installation manual (this manual)
•
Customer Welcome Kit
Inspect all units and parts for possible transport damage.
Note
For information on how to install the IP handset and cradle, refer to
the user manual for the handset.
Important
Upon installing the TracPhone system, make sure the terminal
and IP handset have the latest software installed. The latest
software versions are available to KVH dealers and distributors
on the KVH Partner Portal. The latest version of terminal
software can also be downloaded over the satellite link (see the
User's Guide for details). Refer to the User's Guide and IP
Handset User's Guide for complete instructions on uploading
new software versions to the units.
Chapter 2
2
7