Entering The Sim Pin For The Terminal - KVH Industries FleetBroadband FB250 Installation Manual

5.3 Entering the SIM PIN for the terminal

5.3.1 Overview
If your SIM card requires a PIN, you have to enter a PIN to use the system. You
can enter the PIN using a standard or ISDN phone, the IP handset or the web
interface.
For information on how to connect the handset or computer you are going to
use, refer to the user manual.
5.3.2 Entering the PIN using a phone or IP handset
To enter the PIN
If you have a phone connected to the terminal, you can use it to enter the PIN
at start up.
Do as follows:
For an analog or ISDN phone:
•
Pick up the phone. When the terminal is waiting for a PIN, you will hear 2
beeps - pause - 2 beeps - etc.
Dial <PIN> followed by #.
When you hear a "busy" tone or a dialing tone, the PIN has been accepted
and you can hang up or dial a number.
For an IP handset:
•
Select the BGAN menu, select ENTER PIN and enter the user name and
password for the terminal. Then enter the PIN for the terminal.
Note
The ENTER PIN menu item is only available if your SIM card
requires a PIN, and the PIN has not yet been entered and
accepted in the terminal.
Entering the SIM PIN for the terminal
Chapter 5: Starting up the system
89