Intended Readers - KVH Industries FleetBroadband FB250 Installation Manual

About the manual

Intended readers

This is an installation manual for the TracPhone FB500 and the
TracPhone FB250 systems, intended for installers of the system
and service personnel. Personnel installing or servicing the system
must be properly trained and authorized by KVH Industries. It is
important that you observe all safety requirements listed in the
beginning of this manual, and install the system according to the
guidelines in this manual.
Manual overview
Note that this manual does not cover general use of the system nor
does it cover how to use the IP handset that comes with the
system. For this information, refer to the user manual for this
system and the user manual for the IP handset, both listed in the
next section.
This manual has the following chapters:
•
•
•
•
•
•
vi
System units contains a short description of each main unit in
the system.
Installing the system describes where to place the system units,
how to mount them, special considerations for grounding,
distance to other equipment etc.
Connecting power explains how to connect the terminal to
power and gives recommendations for cables.
Hardware interfaces describes each interface on the terminal
and shows pin-out for the connectors.
Starting up the system explains how to insert the SIM card,
power up the system and enter the PIN. It also gives a short
overview of how to use the system.
Service and repair describes how to replace modules for
service.
2