Vitek VTC-BHOCRAZ Manual page 21

Operating Instructions
UNLIKE the conventional zoom which can zoom in/out the center area of image
only, the flexible zoom location and area, SMART MOTION ZOOM differentiates
its usefulness from others.
That is, a conventional camera installed in the corner of the ceiling can zoom
the center of the floor in a room and result in losing the image of a door on the
side wall. However, SMART MOTION ZOOM can be set to see the door side and
zoom in that area without missing the IMPORTANT security point.
H-POINTER
V-POINTER
O-ZOOM RATIO
D-ZOOM RATIO
MOTION CHK COUNT
RETURN
• H-POINTER (10) - Moves MOTION ZOOM area(Yellow window) horizontally
• V-POINTER (10) - Moves MOTION ZOOM area(Yellow window) vertically
• O-ZOOM RATIO (OX2.0) - Sets the area size to be Optically zoomed when
motion occurs in the black window
• D-ZOOM RATIO (DX1.5) - Sets the area size to be Digitally zoomed when
motion occurs in the black window
• MOTION CHK COUNT (2) - SMART MOTION ZOOM is activated after the
motion in MOTION CHK COUNT are detected in a certain period.
For example, SMART MOTION ZOOM is activated after set # of triggers by
motion.
SMART MOTION ZOOM
10
10
OX2.0
DX1.5
2
RET
.
21