Vitek VTC-BHOCRAZ Manual page 18

Operating Instructions
3-2. SHARPNESS
(default: 10)
3-3. COLOR GAIN
(default: 10)
3-4. GAMMA
(default: 0.5)
4. SPECIAL
SPECIAL
MIRROR/FLIP
PRIVACY
MOTION
PIXEL DEFECT
TITLE SET
DISPLAY
DEFOG
POINTING ZOOM
RETURN
4-1. MIRROR/FLIP
(default: OFF)
: Reverses the video left and right and/or up and down by MIRROR/FLIP.
¥ OFF : Normal display without mirroring or flipping
¥ Hor. : Video is reversed left and right
¥ Ver. : Video is reversed upside down
¥ HV : Video is reversed left and right and upside down
When the video is reversed by Ver. or HV, then the joystick directions are
reversed accordingly.
This feature is very useful when a camera is installed upside down.
4-2. PRIVACY
: 10 Privacy zones which can be enabled individually by ZONE DISP are
available to mask the video
¥ ZONE NUMBER : Set a number to select a privacy zone from 1~10.
¥ ZONE DISP : ON enables to display relevant privacy zone
¥ H-POS,V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone.
¥ COLOR : Select the color used for masking the zone form eight colors.
¥ TRANSPARENCY : Defines the transparency for the mask zone.
: Adjusts the sharpness of video.
: Adjusts the color level of video.
: Adjusts the gamma of video.
OFF
OFF
OFF
OFF
RET
18