Vitek VTC-BHOCRAZ Manual page 10

Installation Instructions
Limit of pan & tilt
• Unlock the screw on the camera bracket using the torque wrench supplied
• Set the camera's viewing angle then lock the screw on the bracket.
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
90¡ 90¡
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
80¡
90¡
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
–90¡
10