Table of Contents
Advertisement
Installation Instructions
Power Supply Connections
• Make sure the power is removed before installation.
• Camera can work with either 24VAC or 12VDC, dual voltage power.
• Primary and secondary grounds are completely isolated to avoid the possible
ground-loop problems
In case that HD-SDI Inputs are not supported by Monitor, please use HD-SDI
Converter to connect HD-SDI cable with Monitor
Please check Specification of Monitor before installation.
VIDEO (BNC)
AC24V/DC12V (Red wire)
AC24V/GND (Black wire)
RTX+ (White wire)
RTX- (Gray wire)
11
Advertisement
Table of Contents
