Table of Contents
Advertisement
Quick Links
FEATURES:
• 1/2.9" Sony® CMOS
• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)
• Up to 30fps live view@ 1920x1080 (1080p)
• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZ39) / 9-22mm (VTC-
BHOCRAZ922) Varifocal Lens
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by
tracking motion, then optically zooming into that area of the frame
• Fully programmable advanced WDR
• 40 850nm IR LEDs with up to 150' IR range
• Integrated Cooling Fan
• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic
IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror,
Flip
• 100% Pure Digital Transmission of video data
• Up to 700' HD Transmission Range (Depending on cable characteristics and
integrity)
• Heavy Duty IP68 rated weather/vandal resistant
aluminum construction
• 12VDC / 24VAC Dual Voltage Operation
VTC-BHOCRAZ
2.1MP HD-SDI Vandal Resistant
AFZ/WDR IR Bullet Camera
Advertisement
Table of Contents
Related Manuals for Vitek VTC-BHOCRAZ
Summary of Contents for Vitek VTC-BHOCRAZ
- Page 1 VTC-BHOCRAZ 2.1MP HD-SDI Vandal Resistant AFZ/WDR IR Bullet Camera FEATURES: • 1/2.9” Sony® CMOS • 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M) • Up to 30fps live view@ 1920x1080 (1080p) • MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZ39) / 9-22mm (VTC- BHOCRAZ922) Varifocal Lens •...
-
Page 2: Safety Precaution
Safety Precaution To prevent electrical shock and/or fire hazard, use only specified power source. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage"... - Page 3 Safety Precaution NOTICE The image used in this instruction manual are processed to help comprehension and may differ from actual video of the camera. Avoid installing in areas where shock or vibration may occur. Pay attention to safety when installing the connection cable and observe that the cable is not subjected to heavy loads, kinks or damage and no moisture can get in.
-
Page 4: Table Of Contents
Contents p. 02 - 03 Safety Precaution Optional Dome Mounts p. 04 Contents p. 05 - 06 Features p. 06 Package Includes p. 07 Dimensions p. 08 Part Names p. 09 - 11 Installation Instructions p. 12 - 25 Operating Instructions p. -
Page 5: Features
Features Key Features • Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p) • True WDR(Wide Dynamic Range) • Improved Noise reduction with the enhanced 3D-NR • VTC-BHOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens (Optical 3x Auto focus zoom / Digital 32x zoom) •... -
Page 6: General Description
- Can accept infrared light • 24VAC/12VDC dual power - Offers the flexibility of installation - Ensures the reliability Package Includes Complete Installation and VTC-BHOCRAZ Camera General Operation Mounting Template Operation Instructions on CD Instructions Plastic Anchor: 6 x 30mm (4pcs) -
Page 7: Dimensions
Dimensions (unit: inches) 3.15 3.39 4.35 10.11... -
Page 8: Part Names
Part Names SUNSHIELD BOLT POWER AND VIDEO CABLE SUNSHIELD DUAL WINDOW BRACKET FRONT CASE REAR CASE OSD Setup CONTROL COVER CAUTION • Extreme care should be taken NOT to scratch the window in front of lens while installing or adjusting the camera. -
Page 9: Installation Instructions
Installation Instructions 1. Locate the mounting template at the installation position and drill the ceiling or wall if needed. (*The easy bracket can not be installed on the ceiling) 2. Place the easy bracket on pre-drilled position and attach using mounting screws(4x30mm). - Page 10 Installation Instructions Limit of pan & tilt • Unlock the screw on the camera bracket using the torque wrench supplied • Set the camera’s viewing angle then lock the screw on the bracket. 1) Pan limit: Pan is limited to +/- 90°. 2) Tilt limit: Tilt is limited to 0°(2°) min ~ 90°...
- Page 11 Installation Instructions Power Supply Connections • Make sure the power is removed before installation. • Camera can work with either 24VAC or 12VDC, dual voltage power. • Primary and secondary grounds are completely isolated to avoid the possible ground-loop problems In case that HD-SDI Inputs are not supported by Monitor, please use HD-SDI Converter to connect HD-SDI cable with Monitor Please check Specification of Monitor before installation.
-
Page 12: Operating Instructions
Operating Instructions Using OSD controller Setup menu can be accessed and controlled by OSD control joy stick on the side of camera unit. Five commands are available with the joy stick. The design of OSD could be different according to the Model. Cover Open SUB-OUT Video Sub-out... - Page 13 Operating Instructions OSD menu Start up Press (OSD menu SET key) down to access the setup menu mode. Lens Initializing is strongly recommended at the first stage of setup menu control. ZOOM/FOCUS > LENS INIT > Press the joystick straight down for about 2 seconds.
- Page 14 Operating Instructions NORMAL BLC — Improves the visibility of dark objects caused by bright back SCENE light. Outside area of BLC window can over saturate. ENHANCE BLC has a target window for compensation and its size and position can be set by H-POS, V-POS, H-SIZE and V-SIZE. HLC —...
- Page 15 Operating Instructions 1. ZOOM/FOCUS ZOOM / FOCUS ZOOM PUSH FOCUS MODE D-ZOOM LENS REFRESH LENS INIT. RETURN 1-1. FOCUS MODE (default: ZOOM PUSH) : ZOOM PUSH, AUTO and MANUAL modes are available for focusing. 1-2. D-ZOOM (default: OFF) : D-ZOOM(Digital zoom) is available up to 32x. D-ZOOM starts working when the optical zoom reaches its maximum tele-position.
- Page 16 Operating Instructions CAUTION • It is necessary to execute LENS INIT in cases below; 1) At the final step of installation. 2) When out of focus due to shock or vibration. 2. EXPOSURE EXPOSURE AUTO MODE |:::::::|::::::| 10 BRIGHTNESS SENS-UP |:::::::|::::::| 12 MOTION DEBLUR RETURN...
- Page 17 Operating Instructions 2-3. SENS-UP (default: OFF) : A brighter video can be obtained by increasing the exposure time at night with SENS-UP. SENS-UP is the maximum integrations of frame by DSS (Digital Slow Shutter) in low light. • AUTO: SENS-UP is enabled or disabled automatically by the scene brightness. Higher SENS-UP can get brighter video but the slower frame rates will cause motion blur and more white pixels.
- Page 18 Operating Instructions 3-2. SHARPNESS : Adjusts the sharpness of video. (default: 10) 3-3. COLOR GAIN : Adjusts the color level of video. (default: 10) 3-4. GAMMA (default: 0.5) : Adjusts the gamma of video. 4. SPECIAL SPECIAL MIRROR/FLIP PRIVACY MOTION PIXEL DEFECT TITLE SET DISPLAY...
- Page 19 Operating Instructions 4-3. MOTION (default: OFF) : MOTION can detect the changes in the motion window and displays the results in blocks and/or a text message. • SENSITIVITY : Adjusts the detection sensitivity for motion. Higher value increases the sensitivity to detect small motion easier. Too low of sensitivity will cause erratic detection.
- Page 20 Operating Instructions choose a character and selects it. The selected characters are added and displayed on the top left Corner and the cursor moves right automatically for next input. 4-6. DISPLAY : Enables or disables the OSD display. • ID : ON enables camera ID display defined by SYSTEM>COMM. SETUP>CAM ID.
- Page 21 Operating Instructions UNLIKE the conventional zoom which can zoom in/out the center area of image only, the flexible zoom location and area, SMART MOTION ZOOM differentiates its usefulness from others. That is, a conventional camera installed in the corner of the ceiling can zoom the center of the floor in a room and result in losing the image of a door on the side wall.
- Page 22 Operating Instructions POINTING ZOOM This camera has a very useful and powerful feature, POINTING ZOOM, which can zoom in/out any area. POINTING ZOOM enlarges the area defined by a yellow window to a full size image when motion is detected in the black window. POINTING ZOOM window can be re-sized by adjusting D-ZOOM RATIO and moved by H-POINTER and V-POINTER.
- Page 23 Operating Instructions *Example of Smart Motion and Pointing Zoom Features...
- Page 24 Operating Instructions 5. SYSTEM SYSTEM TV SYSTEM EU(PAL) RESOLUTION 1080P COMM. SETUP LANGUAGE FACTORY DEFAULT RETUTN 5-1. TV SYSTEM (default: US or EU) : Selects HDTV standards for US(60HZ) or EU(50HZ). By this selection, 2nd analog video output switches to NTSC or PAL accordingly. 5-2.
- Page 25 Operating Instructions Setting for RS-485 Communication with PTZ Controller NEAR...
- Page 26 Detailed Specifications VTC-BHOCRAZ39 VTC-BHOCRAZ922 Sensor 1/2.9” Sony® CMOS Resolution 2.1 MegaPixel (1080p / 720p) More than 50 dB (AGC Off) Video Output 1x HD-SDI (BNC) IR Illuminators 40 IR LEDs IR Color Temp. 850nm IR Range 150’ Dynamic Intensity IR LEDs MegaPixel IR Corrected 3-9mm Varifocal Zoom Lens MegaPixel IR Corrected 9-22mm Varifocal Zoom...
- Page 27 OTHeR PRODuCTS FROM VITeK On Cue HD-SDI Video Recorders VT-HDOC Series On Cue Series 4, 8, & 16 Channel HD-SDI Video Recorders • 4, 8, or 16 Channel HD-SDI Inputs (Universal) with Full1080p, 720P, 960H & D1 Camera Support • Simple plug and play, point-to-point connection from camera to DVR •...
- Page 28 NOTES...
- Page 29 VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user.
- Page 30 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 28492 Constellation Road ValenCia, Ca 91355 WWW.ViteKCCtV.CoM | 888-ViteK-70 Version 1.0 Sept 2014...