Graphic Equalizer Section - Samson S4000 Owner's Manual

Controls and Functions

Graphic Equalizer Section

57. MONITOR EQUALIZER - This nine-band MON-
ITOR EQUALIZER allows you to contour the
frequency response of the AUX 1 mix bus
signal. Providing a maximum of 12dB of cut/
boost for each frequency band, the Graphic
EQ is also extremely useful tool for cutting the
frequencies that cause annoying feedback. The
frequency response is flat when the sliders are
in the center position. Moving a slider in the
positive direction will boost that frequency by
as much as 12dB, and moving the slider in
the negative direction will cut that frequency by up to 12dB. The response curve set using the
Graphic Equalizer is also applied to the signal at the AUX 1 output.
58. MONITOR EQ ON/OFF Switch - The EQ ON/OFF switch is used to engage or bypass the MONITOR
EQUALIZER. When the switch is in the down position, the EQ is on and when the switch is up,
the EQ is bypassed.
59. MAIN STEREO EQUALIZER - This nine-band MAIN STEREO EQUALIZER allows you to contour
the frequency response of the MAIN stereo mix bus signal. Providing a maximum of 12dB of
cut/boost for each frequency band, the Graphic EQ is also extremely useful tool for cutting the
frequencies that cause annoying feedback. The frequency response is flat when the sliders are
in the center position. Moving a slider in the positive direction will boost that frequency by as
much as 12dB, and moving the slider in the negative direction will cut that frequency by up to
12dB. And since the MAIN Graphic Equalizer is stereo, the EQ curve is applied to both the left
and right signal at the internal power amp input, the MAIN MIX out, MAIN INSERT, as well as
the MAIN MIX OUT 2 output.
60. MAIN EQ ON/OFF Switch - The EQ ON/OFF switch is used to engage or bypass the MAIN EQUAL-
IZER. When the switch is in the down position, the EQ is on and when the switch is up, the EQ
is bypassed.
24
57
59
58
60