Programmable Features; Assignable Radio Functions - Motorola Astro APX Mobile 05 control head User Manual

Programmable Features

Any reference in this manual to a control that is
"preprogrammed" means that the control must be programmed
by a dealer or a qualified radio technician using the radio's
programming software, in order to assign a feature to that
control.
The programmable buttons can be programmed as shortcuts to
radio functions or preset channels/groups depending on the
duration of a button press:
•
Press – Pressing and releasing rapidly.
•
Long press – Pressing and holding for the programmed
duration (between 0.25 seconds and 3.75 seconds).
•
Hold down – Keeping the button pressed.

Assignable Radio Functions

Call Alert – Allows the radio to function like a pager, or to verify
if a radio is active on the system.
Call Response – Allows you to answer a private call or phone
call.
Channel – Selects a channel.
Contacts – Selects the Contacts menu.
Dynamic ID (Conventional Only)
radio's ASTRO Individual ID and/or MDC Primary ID.
– Allows you to edit the
Dynamic Priority (Conventional Only)
in a scan list (except for the Priority-One channel) to temporarily
replace the Priority-Two channel.
Emergency – Depending on the programming, initiates or
cancels an emergency alarm or call.
Information – Displays the basic radio information, IP-related
information, and buttons or switches control mapping.
Intercom – Enables users of multiple control heads to talk to
each other via the control heads in a multi-control head setup.
Internet Protocol Address –
address, device name, and status of the radio.
Location – Determines the current location (latitude, longitude,
time and date), and also the distance and bearing to another
location. Or, turns the GPS functionality on or off for all
locations.
Message – Enters the current message list.
Monitor (Conventional Only)
for all radio traffic until function is disabled.
Multiple Private Line (Conventional Only)
Multiple Private Line lists.
Nuisance Delete – Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list.
– Allows any channel
Displays the Internet Protocol (IP)
– Monitors a selected channel
– Selects the
English
7