Linking With A Hi-Fi Music System - Sony STR-ZA3000ES Installation Manual

Linking with a Hi-Fi music system

This receiver can switch its power and input automatically by linking with playback operation
of the Hi-Fi music system.
Configure settings to enable the receiver to operate linked with a Hi-Fi System device.
1
Select [Setup] - [Network Setup] - [Music Connect] from the home.
2
Select the setting you want.
Connected Device: Select the connected device to enable the function.
Input for Music Connect: Select the input to link with.
3
Start playback on the player device.
The receiver will be turned on and the input switched automatically.
To disable Music Connect
Select [Setup] - [Network Setup] - [Music Connect] - [Connected Device] - [Remove Connected
Device] from the home menu.
Notes
• The Music Connect feature can be linked only with the power source and input of the main zone. This
feature does not link with zone 2 or zone 3.
• The link feature of Music Connect may not work correctly depending on factors such as the
specifications of the connected device.
• We recommend that you set [Network Standby] to [On] to activate the feature for linking with Music
Connect even if the receiver is in standby mode.
• Only one Hi-Fi music system device can be linked with the receiver at a time using the Music Connect
feature.
9
GB