Installing And Connecting The Ac Power Supply; Installing And Wiring A Dc Power Supply - Juniper 5000 SERIES User Manual

Juniper networks, inc. user's guide power supply netscreen-5000 series
Table of Contents

Advertisement

Available languages

Available languages

I
NSTALLING AND
To install and connect the AC power supply to the NetScreen-5000 Series device:
1.
On the NetScreen-5200, slide the power supply into one of the power
compartments in the back of the system.
On the NetScreen-5400, slide the power supply into one of the power
compartments on the front of the system.
2.
Fasten the power supply to the system by tightening the corner screws into the
eyelets on the sides of the power supply.
3.
If you want to install two power supplies in the NetScreen-5200 or three power
supplies in the NetScreen-5400, repeat steps 1 and 2 for the remaining power
supplies.
4.
Connect the female end of a standard power cord to the male connector on the
back of each power supply.
5.
Connect each power cord to a standard 100-240-Volt power outlet.
Note:
Series device, connect each to a different power source. Each power supply is
intended to receive power from separate feeds.
6.
Turn the power switches on.
Note:
and any of them are off, the Alarm LED on the management module glows red.
This alarm indicates that maximum system stability requires all installed power
supplies to be operational.
I
NSTALLING AND
To install and connect the DC power supply to the NetScreen-5000 Series device:
1.
On the NetScreen-5200, slide the power supply into one of the power
compartments in the back of the system.
On the NetScreen-5400, slide the power supply into one of the power
compartments on the front of the system.
2.
Fasten the power supply to the system by tightening the corner screws into the
eyelets on the sides of the power supply.
3.
If you want to install two power supplies in the NetScreen-5200 or three power
supplies in the NetScreen-5400, repeat steps 1 and 2 for the remaining power
supplies.
NetScreen-5000 Series
C
ONNECTING THE
Whenever you deploy two or more power supplies to a NetScreen-5000
If there are multiple power supplies in the NetScreen-5000 Series device
W
DC P
IRING A

Installing and Connecting the AC Power Supply

AC P
OWER
S
OWER
UPPLY
S
UPPLY
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netscreen-5000 series

Table of Contents