Netscreen-5200 Mid-Mount; Netscreen-5400 Front Mount - Juniper 5000 SERIES User Manual

Chapter 2 Installing the Device

NetScreen-5200 Mid-Mount

To mid-mount the NetScreen-5200, you need four fitted screws, a Phillips-head
screwdriver, and brackets.
To mid-mount the NetScreen-5200:
1. Screw the left and right brackets to the middle of each side of the chassis, as
shown below.
2. Screw the left and right brackets to the rack.

NetScreen-5400 Front Mount

To front mount the NetScreen-5400, you need four fitted screws, a Phillips-head
screwdriver, and brackets.
To front mount the device:
1. Screw the front mount bracket to the front of the chassis, as shown below.
2. Screw the left and right brackets to the rack.
16 User's Guide