Netscreen-5000 Modules; Management Modules - Juniper 5000 SERIES User Manual

Chapter 1 Overview
N S -5000 M
ET CREEN
The NetScreen-5000 Series device supports two module types:
• NetScreen-5000 management modules
• NetScreen-5000 Secure Port Modules (SPMs)
The following table shows the modules supported by each slot.
slot 1
NetScreen-5200 Management Module Secure Port Module
NetScreen-5400 Management Module Secure Port Module

Management Modules

The management module provides general-purpose CPU delivery, and contains dedicated
High Availability (HA) and management interfaces. It handles tasks such as management
access, session setup and termination, and Internet Key Exchange (IKE) negotiation.
Note: There are currently two management modules: The 5000-M and 5000-M2.
The 5000-M Management Module
The 5000-M is based around a powerful, 600-MHz PowerPC CPU, which assists other
system elements, primarily with non-flow related tasks. The 5000-M management module
provides overall management and control of the system. Although it performs system
management, the primary function of the 5000-M is to support the other modules.
Features of the 5000-M module include:
• A management port, for WebUI management sessions or Command Line
Interface sessions.
• A console port, for serial terminal emulation programs such as HyperTerminal.
• Two High Availability (HA) ports.
• A modem port.
The 5000-M also has port Link and Activity LEDs, CPU utilization indicators, a High
Availability (HA) LED, an Alarm LED, a Status LED, a Flash LED, and a Power LED. In
addition, it has a compact flash slot for flash memory card installation.
8
ODULES
slot 2 slot 3 slot 4
N/A N/A
Secure Port Module Secure Port Module
User's Guide