Table of Contents
Advertisement
11 – SD Card Management
Reformatting MTR partitions
You can reformat an MTR partition if you want. Use this function
when you just want to format a specific partition without
changing its size.
CAUTION
You cannot undo this operation! All the data on the selected
MTR partition will be erased, so be certain that you will not
lose anything important when reformatting.
When the recorder is stopped, press the MENU button to
1
open the MENU screen.
Use the DATA wheel to select CARD, and press the F4 (¥)
2
button to open the CARD menu screen.
Turn the DATA wheel to select REFORMAT.
3
Press the F4 (¥) button to open the REFORMAT screen.
A list of the MTR partitions and their sizes (not open
capacities) appear.
A * marks the active partition.
4
Turn the DATA wheel to select the partition that you want to
reformat and press the F2 (EXEC) button.
A pop-up message warning that all data on the partition will
be erased appears.
5
Press the F3 (YES) button to reformat the partition.
• When reformatting finishes the CARD menu reopens.
• After reformatting, one song is automatically created in the
MTR partition.
• To cancel reformatting, press the F4 (NO) button.
58
TASCAM DP-03SD
Reformatting the FAT partition
You can also reformat just the FAT partition. The size of the FAT
partition cannot be changed.
CAUTION
You cannot undo this operation! All data on the FAT
partition will be erased, so be certain that you will not lose
anything important when reformatting.
1
When the recorder is stopped, press the MENU button to
open the MENU screen.
2
Turn the DATA wheel to select CARD, and press the F4 (
button to open the CARD menu screen.
3
Turn the DATA wheel to select FAT REFORMAT, and
¥
press the F4 (
) button.
A pop-up message warning that all data on the FAT partition
will be erased appears.
4
Press the F3 (YES) button to reformat the FAT partition.
• When reformatting finishes the CARD menu screen reopens.
• To cancel reformatting, press the F4 (NO) button.
¥
)
Advertisement
Table of Contents
