Table of Contents
Advertisement
Left side panel
Computer
NOTE
Recorder functions cannot be used when the unit is
connected to a computer by USB.
Adjusting the contrast
The contrast of the display can be adjusted.
Follow the procedures below to adjust the contrast.
When the recorder is stopped, press the MENU button to
1
open the MENU screen.
2
Use the data wheel to select PREFERENCE, and press the
F4 (¥) button to open the PREFERENCE screen.
§
¶
3
Use the F3 (
) and F4 (
setting value, and use the DATA wheel to adjust the display
contrast.
The setting range is from 1–10.
The default value is 5.
Lower values reduce the display contrast while higher values
increase it.
Adjusting the contrast might make the display easier to read.
Its appearance differs depending on the angle from which it
is viewed, so adjust the contrast while the unit is in the actual
position in which it will be used.
After making the setting, press the HOME button to return
4
to the Home Screen.
USB
) buttons to select the Contrast
4 – Preparations
TASCAM DP-03SD
29
Advertisement
Table of Contents
