Rear Panel; Left Side Panel - Tascam DP-006 Owner's Manual

3 – Names and functions of parts

Rear panel

g INPUT B ( standard jack)
Use this jack for a line level or mic signal (unbalanced connection).
Use this as an input source by setting IN-B (INPUT B) on the INPUT
SETTING screen for a line level input (LINE , LINE Mid or LINE
Hi gh ) or an external mic (MIC).
h INPUT A ( standard jack)
Use this jack for a guitar, line level or mic signal (unbalanced connection).
Use this as an input source by setting IN-A (INPUT A) on the INPUT
SETTING screen for a guitar or line level input (GUITAR/LINE ,
GUITAR/LINE M or GUITAR/LINE H ) or an external mic (MIC).
Set the MIC/LINE-GUITAR switch on the left side of the unit according to
the input source.
32
TASCAM DP-006

Left side panel

MIC/LINE-GUITAR switch
j
Set this switch to match the input signal to the INPUT A jack on the rear
panel. For mic or line signals, set it to MIC/LINE. For electric guitars and
basses that are connected directly, set it to GUITAR.
TIP
When connecting an electric-acoustic guitar with a built-in preamp or an
active electric guitar, as well as when connecting an electric guitar with
effect boxes between it and this unit, set the MIC/LINE-GUITAR switch to
MIC/LINE.
k /LINE OUT jack (stereo mini jack)
Connect headphones or an external monitoring system (powered monitor
speakers or an amplifier and speakers) here.
The VOLUME dial
l
Use to adjust the volume output from the
CAUTION
The VOLUME dial does not have any indications. Before turning the power
ON, always turn it in the direction of the arrow until it stops to minimize
the volume. Sudden bursts of loud sounds can cause hearing damage and
speaker damage, for example.
/LINE OUT jack.