Epson Stylus CX4300 Service Manual page 74

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450
After replacing the Main Board, perform the following
A D J U S T M E N T
R E Q U I R E D adjustments (T.B.D.).
(p100)")
1. "EEPROM data copy" (only after replacement)
2. "Destination Setting" (only after replacement*)
3. "USB ID Input" (only after replacement*)
4. "Waste Ink Pad Counter" (Ink Pads must be replaced)
5. "Head ID Input" (only after replacement*)
6. "TOP Margin Adjustment" (only after replacement*)
7. "First Dot Adjustment" (only after replacement*)
8. "Head Angular Adjustment" (only after replacement*)
9. "Bi-D Adjustment" (only after replacement*)
10."PF Band Adjustment" (only after replacement*)
11. "CR Heat Protection Control" (only after replacement*)]
Note * : (EEPROM Copy NG)
DISASSEMBLY/ASSEMBLY
(Refer to Chapter 5 " ADJUSTMENT
Removing Board
Revision A
74