Epson Stylus CX4300 Service Manual page 41

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450
Occurrence
timing Detailed phenomenon
CR position
• Operation
The drive of the PF Motor is not
transmitted to the LD Roller Shaft.
• –
TROUBLESHOOTING
Table 3-9. Check point for paper out error according to each phenomenon
Defective
unit/part name
1. Check if the Extension Spring 0.143 does not come off in
the Clutch mechanism.
2. Check if the positioning hole of the Clutch does not come
off from the guide pin of the LD Roller Shaft.
ASF Unit
LD Roller Shaft
3. Check if the Clutch tooth is not damaged.
4. Check if the Clutch is not damaged.
Troubleshooting
Check point
1. Reassemble the Extension Spring 0.143 in the
Extension Spring 0.143
Clutch
2. Reassemble the positioning hole of the Clutch
Guide pin
Positioning hole
Clutch
3. Replace the ASF Unit with a new one.
4. Replace the ASF Unit with a new one.
Revision A
Remedy
Clutch mechanism.
on the guide pin of the LD Roller Shaft.
41