Button Sewing - New Home 535 Manual Instruction

BUTTON SEWING

Fit the button sewing tool to the machine. Set the drop
feed button at "EMBR." With the button sewing tool
In a raised position, place a button on the fabric with its
holes in a horizontal line and the left side hole underneath
the needle, and lower the fool upon it.
Set the zigzag width control knob in accordance with the
distance between the holes in the button, so that the needle
enters the right side hole.
Sew six or seven stitches by turning the balance wheel with
your right hand.
To lock the thread, set the zigzag width control knob at "0"
and make three or four stitches.