Darning And Embroidery - New Home 535 Manual Instruction

DARNING AND EMBROIDERY

Raise the presser bar lifter and remove the presser foot. Then lower the presser bar lifter to ensure the
thread tension device is set correctly.
Set the drop feed knob at "EMBR".
Now your machine is ready for embroidery and darning.
Embroidery will be done most successfully when the fabric is stretched and fixed in an embroidery hoop.
Hold the hoop closely on the machine bed with both hands, press the material with your left forefinger
in the vicinity of the needle.
This will help in holding down the material and will prevent the machine from making skipped stitches.
Manipulate work carefully and be sure to keep fingers out of the path of the needle.
22
Adjust thread tensions for the best appearance of embroidery work and slightly increase the bobbin
thread tension to avoid the lower thread from being pulled up.