Tension Of Lower Thread; To Use Built-In Sewlight - New Home 535 Manual Instruction

TENSION OF LOWER THREAD

The tension or the lower thread is regulated· by a small screw
on the bobbin case tension spring.
To increase the tension, tighten the screw slightly with a small
driver.
To decrease the tension, loosen the screw slightly.
TO USE BUILT- IN SEWLIGHT
Sewlight is connected directly to the main supply lead of the
machine when the motor plug is inserted into the connector.
This results in the light acting as a warning when the machine
is connected to the electricity supply.
To change the bulb, remove same by slightly pushing it upward
and turning it anti-clockwise. Insert a new bulb by fitting the
pins on the bulb into the slot, pushing upwards and turning
it clockwise.