Advertisement
1999 Cougar Workshop Manual
20. NOTE: Check the seating of the upper part of the engine front cover gasket and correct as necessary.
Secure the upper part of the engine front cover.
21. Install the power steering pipe bracket to the engine lift eye.
22. NOTE: One bolt also holds the power steering line bracket.
Install the front support insulator.
23. Remove the floor jack.
24. Install the coolant expansion tank.
Attach the speed control cable (if equipped) to the coolant expansion tank .
25. Raise and support the vehicle. For additional information, refer to Section 100-02.
Vehicles with automatic transaxle
26. NOTE: Verify that the center bolt is centered in the support insulator.
Tighten the center bolt of the right-hand engine support insulator.
Vehicles with manual transaxle
27. NOTE: Verify that the center bolt is centered in the support insulator.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXU/~MUS~LEN/21/...
Page 8 of 10
12/1/2009
Advertisement
