Arbitrary Shutter Setting - Sony XCL-5005CR Technical Manual

5.2.

Arbitrary shutter setting

You can set the shutter setting from a minimum of 50 ns
to a maximum of 60 s in increments of 1 CLK or 1 µs.
♦ Configuring an arbitrary shutter setting
Set three parameters with SHUTTER commands.
Parameter 1: 15
Parameter 2: Numeral in increments of 1 µs.
Parameter 3: 1/60 MHz = integer in increments of 16.7 ns
Setting example
Exposure time [µs]
0.050 (50 ns)
1.000
31.500
1500000
60000000 (60 s)
You can set an arbitrary setting in any mode other than
trigger mode.
Mode Settable
Normal a
Binning a
Partial a
Trigger –
Note
Use of an arbitrary shutter may result in horizontal noise
occurring in the captured image. In such a case, you can
remove the noise by using the overlap function.
When the exposure time is set to 10 µs and below, or 2 s
and above, smear and noise may appear in images. This
is not a malfunction.
26
5. Shutter setting
Command
SHUTTER 15 0 3 (Minimum setting)
SHUTTER 15 1
SHUTTER 15 31 30
SHUTTER 15 1500000
SHUTTER 15 60000000 (Maximum setting)
Remark
Only settable for XCL-5005
1/15 s or less and 1/7.5 s or
more is also settable
(Arbitrary shutter selection)
0 - 60000000
0 - 59