Aj Setting Command (Xcl-5005Cr Only) - Sony XCL-5005CR Technical Manual

"OK":
"LEVEL HIGH": Failed because the luminance
"LEVEL LOW": Failed because the luminance
"TIME OUT":
(When default area)
Horizontal 512 columns, vertical 256 lines (horizontal
position 968, vertical position 897)
(When arbitrary area)
Horizontal 256 columns, vertical 256 lines
x Pixel Gain Setting
[Command] PIXEL-GAIN
[Parameter 1] <Mode (0 - 1)>
0: OFF
1: ON
[Process] Sets the pixel gain.
x Manual R Gain Setting
[Command] RGAIN
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the R gain for when WBMODE manual
setting. (Reference value: 128)
x Manual R Gain Setting (Left side of the
window)
[Command] RGAIN-L
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the R gain for when WBMODE manual
setting on the left side of the window. (Reference
value: 128)
x Manual R Gain Setting (Right side of the
window)
[Command] RGAIN-R
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the R gain for when WBMODE manual
setting on the right side of the window. (Reference
value: 128)
x Manual G Gain Setting
[Command] GGAIN
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the G gain for when WBMODE manual
setting. (Reference value: 128)
x Manual G Gain Setting (Left side of the
window)
[Command] GGAIN-L
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the G gain for when WBMODE manual
setting on the left side of the window. (Reference
value: 128)
x Manual G Gain Setting (Right side of the
window)
[Command] GGAIN-R
[Parameter 1] <Gain (0 - 2047)>
42
Command Specification
Ended successfully
level is too high
level is too low
Timeout
[Process] Sets the G gain for when WBMODE manual
setting on the right side of the window. (Reference
value: 128)
x Manual B Gain Setting
[Command] BGAIN
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the B gain for when WBMODE manual
setting. (Reference value: 128)
x Manual B Gain Setting (Left side of the
window)
[Command] BGAIN-L
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the B gain for when WBMODE manual
setting on the left side of the window. (Reference
value: 128)
x Manual B Gain Setting (Right side of the
window)
[Command] BGAIN-R
[Parameter 1] <Gain (0 - 2047)>
[Process] Sets the B gain for when WBMODE manual
setting on the right side of the window. (Reference
value: 128)
AJ Setting Command (XCL-5005CR
only)
x Black Clamp Level Setting
[Command] BBALANCE
[Parameter 1] <Mode (1 - 2)>
1: Automatic adjustment method
2: Direct adjustment method
(When automatic adjustment method)
([Parameter 2]) <Black clamp level correction value
(±1023)>
(When direct adjustment method)
([Parameter 2]) <Black clamp level adjusting value (0 -
2047)>
[Process] Sets the black clamp level setting and black
clamp level adjusting or correction value.
x Black Clamp Level Setting (Left side of the
window)
[Command] BBALANCE-L
[Parameter 1] <Mode (1 - 2)>
1: Automatic adjustment method
2: Direct adjustment method
(When automatic adjustment method)
([Parameter 2]) <Black clamp level correction value
(±1023)>
(When direct adjustment method)
([Parameter 2]) <Black clamp level adjusting value (0 -
2047)>
[Process] Sets the black clamp level setting and black
clamp level adjusting or correction value on the left
side of the window.