Removing The Status Monitor - DataCard SR200 Hardware And Driver Installation Manual

Removing the Status Monitor

Remove the Status Monitor after removing the driver.
1.
Begin with the Card Printer installation window open.
2.
Make sure the following are selected, and then click Next:
•
•
3.
Click OK.
4.
If an uninstall dialog opens, click Yes to continue.
5.
Click Finish. The Status Monitor shortcuts and files are removed from the PC.
6.
Click Exit to close the Card Printer window.
7.
Restart Windows.
Datacard® SR200 & SR300 Printer 
Hardware and Driver Installation Manual
Uninstall
Status Monitor
43