Table of Contents
Advertisement
English
1.15 - Installation accessories
The Freecooling unit can be supplied complete with all main accessories for the installation:
S Wall indoor plate for Freecooling flexible duct connections (two circular holes);
S Freecooling flexible ducts (ø202 mm for SE+SC04-05-06 models, ø250 mm for SE+SC08-10-14)
complete with professional fixing clamps;
S Wall indoor plate for Freecooling rigid duct connection (single rectangular hole);
S External rain-proof grille with metallic prefilter for Freecooling intake;
S Overpressure gravity damper, to discharge outdoor the exhaust air from inside, especially designed
for this machine;
S External rain-proof grille, to protect the overpressure damper from worst weather and foreign bodies;
All grilles and dampers are made of extruded aluminium, to achieve the maximum lifetime.
The motor-condensing unit can also be supplied complete with the wall mounting kit, made up of a cou
ple of shelves in galvanized steel, painted with polyester powders in the color RAL 9002 and smooth finish
ing, suitable vibration-damping supports in elastomer and all the small connecting parts in stainless
steel, with screw anchors for wall mounting (see Fig. Wall mounting).
NOTE: the screw anchors supplied in the kit are to be used only in case of shelf mounting on concrete
or brick walls (hollow bricks included). Do not use on sandwich walls (e.g. container) or with unknown
composition. In these cases the most suitable mounting system for the specific material shall be applied.
1.16 - Packing
Standard packing consists of a wooden pallet and cardboard box. Polythene foam protects the units'
painted surfaces. On request, a cardboard box with an additional wooden crate or wooden case for sea
transport can be supplied.
1.17 - Tests and reference norms
The units are planned, manufactured and tested in compliance to the European directives 98/37/CE
(89/392/CEE; 91/368/CEE; 93/68/CEE); 89/336/CEE; 73/23/CEE. More deeply, the unit is verified about
Electromagnetic Compactibility according to the following standards: EN55022, radiated and conducted
emission, class B; ENV 50/40/IEC 801-3 radiated immunity; IEC 801-6: radiated immunity on the supply/
signal cables; IEC 801-4 fast transient; IEC 801-2 ESD.
According to that, the machine is supplied complete with a test certificate and a certificate of conformity
to the European directives. Hisp units are marked ''CE".
Further, the Company Quality System of Air Conditioning Division is approved by Lloyd Register Quality
Assurance, in compliance with the standards UNI EN ISO 9001: 1994 and the product is the result of activi
ties carried out according to the provisions contained in the Quality procedures and plans.
8
Hisp
Finishing
Delivery
Production System Quality
Hide quick links:
Advertisement
Table of Contents
