Table of Contents
Advertisement
Hisp
1 - The series
SE+SC04; SE+SC05; SE+SC06; SE+SC08: SE+SC10; SE+SC14
S split air conditioners
S direct expansion units with capillary (SE+SC04; SE+SC05; SE+SC06) or thermostatic valve
(SE+SC08; SE+SC10; SE+SC14)
S microprocessor control
S flexible installation
SE+SC05
1.1 -
Main features
Split units composed by an evaporating indoor unit for ceiling or wall installation and a motor-condensing
outdoor unit, mainly for electronic equipped shelters, process centres, telecommunications sites from 4
to 14 kW of nominal cooling capacity.
The system provides air filtration, indoor ventilation, cooling, heating, freecooling with outdoor fresh air
to assure the useful climate in the site. The unit can accept emergency power supply of 48 Vdc or 24 Vdc,
assuring indoor ventilation and freecooling.
1.2 -
Accessibility
In the evaporating unit the accessibility is granted from the bottom side; removing three screwed panels
and the air discharge grille, it's possible to operate the ordinary and the extraordinary maintenance of the
following components: air filter, coil, fan, electrical panel, heaters (opt.), freecooling module (opt.). In the
motor-condensing unit, a dedicated panel is covering the compressor, the cooling circuit and the electri
cal board; a frontal panel has to be used for the extraordinary maintenance of the axial fan. All the outdoor
fixing screws are anti-vandalism and weather-proof type (special rubber gasket as standard), requiring
a special tool to be removed (supplied with the unit).
1.3 -
Installation
Thanks to its special design, the evaporating unit is available for ceiling (standard factory configuration)
or wall installation (an easy setting, always possible on site, is needed) according to the specific needs.
With vertical installation, the air discharge is upflow.
5 kW model
Split Condensing unit (outdoor)
Split Evaporating unit (indoor)
English
Subject
Functions
Easy Servicing
Flexibility
1
Hide quick links:
Advertisement
Table of Contents
