Chapter 3 Unpacking And Installation; Reference Guide For Receiving, Unpacking, And Preparing For Installation; Equipment Inspection; Packing Material - Liebert CR020 User Manual

Chapter 3 Unpacking And Installation

This chapter introduces unpacking and installation of the Liebert.CRV air conditioner, including reference guide for
receiving, unpacking, and preparing for installation, recommended unit handling equipment, handling the unit while
packaged, unpacking the unit and installation.

3.1 Reference Guide For Receiving, Unpacking, And Preparing For Installation

Risk of top-heavy unit falling over. Improper handling can cause equipment damage, injury or death. Read all of the following
instructions before attempting to move, lift, remove packaging from the unit or prepare unit for installation.
Caution
Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury. Only trained personnel wearing appropriate
safety headgear, gloves, shoes and glasses should attempt to move, lift or remove packaging from the unit or prepare the unit for
installation.
Risk of overhead interference. Can cause unit and/or structure damage. The unit may be too tall to fit through a doorway while on
the pallet. Measure the unit and doorway heights and refer to the installation plans prior to moving the unit to verify clearances.
Risk of unit damage if improperly stored. Keep the unit vertically upright, indoors and protected from dampness, freezing
temperatures and contact damage.

3.1.1 Equipment Inspection

Upon arrival of the unit, and before unpacking, verify that the labeled equipment matches the Bill of Lading. Carefully
inspect all items for either visible or concealed damage. Damage should be immediately reported to the carrier and a
damage claim filed with a copy sent to Emerson Corporation or to your sales representative.

3.1.2 Packing Material

All material used to package this unit is recyclable. Please save the material for future use, or dispose it appropriately.

3.2 Recommended Unit Handling Equipment

The recommended unit handling equipment is shown in Figure 3-1.
Warning
- Risk of top-heavy unit falling over
- Risk of sharp edges, splinters and exposed fasteners
Notice
- Risk of overhead interference
Notice
- Risk of unit damage if improperly stored
Figure 3-1 Recommended unit handling equipment
Liebert.CRV Series Air Conditioner User Manual
Chapter 3 Unpacking And Installation 13