Message Center - Lincoln 2002 Continental Owner's Manual

Driver Controls
ELECTRONIC MESSAGE CENTER
The electronic message center only
SYSTEM
works when the ignition is in the
ON position.
E/M
The message center tells you about
the condition of your vehicle by two
methods:
MENU SELECT
• operator selectable features
VEHICLE HANDLING
• continuous warning reporting of
monitored systems
TRIP DISPLAY
You can select different features for
the message center to display by
DTE ECON
using the message center controls RESET
located to the right of the
instrument cluster. You will hear a tone when you press one of these
controls. However, the message center will display the appropriate
warning message if it detects a warning from any of the monitored
systems.
If you have a vehicle with the Driver
DRIVER ID
Select System, which allows you to
save operator selectable features to
DRIVER 1 or DRIVER 2, you have a
DRIVER ID control in place of the E/M control.
The message center will display the Memory Profile System features
(operator selectable features) which are selected from the MENU and
VEHICLE HANDLING controls.
The Memory Profile System allows for two primary drivers to save their
individual seat and outside rearview mirror position preferences. The
feature will then be set to the remote entry transmitter, that will
automatically recall the saved individualized preferences. Refer to Basic
Operation of Memory Profile System in this section.
Basic operation of Memory Profile System
In order for the system to be able to store or recall an individual's seat
and mirror position preferences, the Memory Profile must first recognize
who will be driving the vehicle. Drivers may identify themselves to the
system one of two ways:
73