Cadillac CTS 2004 Manual page 87

Memo Append X: This command instructs the system
to add to a previously recorded memo that is not the
memo currently highlighted on the screen. To use
this command, you must know the location of the
previously recorded memo to which you want to add
information. For example, if you want to add to the
memo stored in location two, say "memo append two."
The system will switch to memo two and begin
recording. The new information will be added to the
memo in location two.
Memo Delete: This command instructs the system to
delete the memo currently highlighted on the screen.
If no memo has been previously recorded, this
command is not available.
Memo Delete X: This command instructs the system to
delete a previously recorded memo saved to a specific
location. To use this command, you must know the
location of the memo that you want to delete. For
example, if you want to delete the memo saved in
location one, say "memo delete one."
Yes: This command confirms choices made while using
the Voice Memo screen. For example, if you use the
memo delete command, the system will request a
confirmation of the deletion. If you wish to delete the
memo, you must reply with "yes" or the system will not
delete the memo.
This command is only available in the Memo Delete
screens.
No: This command cancels choices made while using
the Voice Memo screen. For example, if you use
the memo delete command, the system will request a
confirmation of the deletion. If you say "no," the system
will not delete the memo.
This command is only available in the Memo Delete
screens.
4-9