Traveling Across Regions - Cadillac CTS 2004 Manual

Hide thumbs Also See for CTS 2004:

Owner's manual (20 pages)

Table of Contents

As you are traveling, the current road is shown at the

bottom center of the map screen. In addition in the upper

center of the map screen will be the next maneuver.

Anytime while on the route, you can press the NAV

(navigation) Repeat button to get an audio prompt of

your next maneuver.

There are two different types of roads in the map

database. Fully attributed roads allow for a destination

to be set and turn-by-turn guidance to be provided to the

exact location of the address. In Process Data (IPD)

roads contain only street name and address information.

Other information such as turn restrictions and direction

of travel is not included for these IPD roads. Therefore,

turn by turn guidance cannot be provided to the

exact address. When trips are planned that include an

IPD destination, turn-by-turn guidance will be provided

on the fully attributed roads closest to the destination.

When nearing the end of the highlighted route the

system will state, "Enroute to your destination, some

roads contain incomplete data. Turn guidance will not be

provided in this area." As you reach the end of the

highlighted route the system will state, "Turn guidance

will not be provided in this area. Please use the direction

arrow and distance indicator to proceed to your

destination." You should refer to the direction and

distance information in the lower center area of the

screen to navigate to the destination, or refer to

the information in the waypoint box for a waypoint.

Once your vehicle is near your destination, the system

will say "You've arrived at your destination, ending

route guidance."

Back: This button always returns you to the previous

screen.