Setting The Tone - Cadillac CTS 2004 Manual

Setting the Tone

Press the AUDIO button located to the left of the screen
to access the Audio screen.
To manually adjust the tone, use the TUNE/SEL knob.
The system will begin with Balance. Turn the knob
to adjust the level. Once you find the level you want,
press the knob once to set it. The system will advance to
the right to Fade.
If you do not wish to change the current setting, press
the knob repeatedly to advance to the feature you
wish to adjust.
Balance: Turn the TUNE/SEL knob to adjust Balance
toward Right or Left.
3-10
Fade: Turn the TUNE/SEL knob to adjust Fade toward
Front or Back.
Bass: Turn the TUNE/SEL knob to increase or
decrease Bass.
Mid (Midrange): Turn the TUNE/SEL knob to increase
or decrease Midrange.
Treble: Turn the TUNE/SEL knob to increase or
decrease Treble.
EQ 1–3 (Equalizer): Once you adjust the bass,
midrange and treble, you can save them for future use.
You may store up to three customized equalizations.
To store equalizations, do the following:
1. Manually set the levels for Bass, Mid and Treble.
2. Press and hold one of the three equalization
buttons.
You will hear a beep once the equalization is stored
successfully.
Equalization settings are unique to each source, and
they must be set individually for each source. For
example, if you select EQ1 for the CD changer and then
switch to a preset radio station, the equalization may
not be the same.
You can save an equalization setting for each stored
preset radio station. See "Setting Preset Stations" listed
later in this section for more information.