Table of Contents
Advertisement
Maps
This section includes basic information that you need to
know about the map database.
Regional and Interstate Maps
The maps are stored on 1 DVD for the United States
and Canada.
To load the map DVD, do the following:
1. Turn the ignition to ON.
2. Insert the DVD, label side up, partway into the
DVD ROM player located above the Navigation
System screen.
Load only one DVD at a time.
It will take approximately 20 seconds to initialize
the DVD data.
If you experience a problem with the DVD, check the
following:
•
Did you insert the DVD label side up?
•
Are you using only one DVD?
Once the DVD is loaded correctly, you will see the
following choices on the Navi System Startup screen:
•
Select a language (the default language is
English)
•
Agree
2-8
You can change the language from English to Spanish
or French, or you can select Agree to go to the
navigation screen. See Setup Menu on page 1-11 for
more information. The map will appear with your current
vehicle position on the map.
If your current vehicle position is incorrect on the map,
see "Veh (Vehicle) Position" under Setup Menu on
page 1-11 . See "Plan a Route" in Navigation Menu on
page 2-10 for more information on planning routes.
Map Database
The map database shows the current map contained in
the player and the current vehicle location on the map.
Map Adjustments
The system allows you to adjust the scale of view on
the map. Also, the map will scroll automatically based on
the direction you are traveling.
To view a larger or smaller scale of the map, press the
multi-function button next to the Zoom In or Zoom
Out prompts at the right of the screen. See "Zoom
In/Out" listed previously in this section for more
information on these prompts.
Map Scales
The scale of a map can range from 1/64 of a mile
(25 km) to 80 miles (128 km).
Advertisement
Chapters
Table of Contents
