Cadillac CTS 2004 Manual page 82

Voice Memo (Memorandum): This command instructs
the system to display the Voice Memo screen. Once
the screen is displayed, you can use other Voice Memo
screen-specific commands. See "Voice Memo
(Memorandum) Commands" listed later in this section
for more information.
Address Book: This command instructs the system to
display the Address Book screen. Once the screen
is displayed, you must operate the system manually
because there are no verbal commands for the Address
Book. For more information, see Main Menu on
page 1-8 .
Mute/Unmute: These commands instruct the system to
turn off all sound when you say "Mute." The sound
will return to its previous level when you say "Unmute."
DSP (Digital Signal Processing) Settings
Commands: You can change the DSP settings
programmed for the currently active source by saying
one of the following commands:
•
DSP Off
•
DSP Talk
4-4
•
DSP Driver Seat
•
DSP Rear Seat
•
DSP Spacious
For more information on the various DSP settings, see
"Setting the Tone" in Navigation Audio System on
page 3-2 .
Day/Night Display Commands: You can adjust the
automatic contrast and brightness of the screen by
saying one of the following commands:
•
Set Day
•
Set Night
•
Set Day/Night Auto
If you prefer to adjust the contrast and brightness to a
customized setting, you must make the adjustments
manually. See Setup Menu on page 1-14 for more
information.