Main Menu
Main Menu
Table of Contents
Lights
Reinstallation:
Put the fastener in the hole of the
wall cover and push on the center
until it locks (the center is flush with
the head).
Maintenance
(B Type)
Removal:
Push on the center of the fastener's
head until it pops in. Then remove
the fastener.
Reinstallation:
1. Reset the fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
2. Put the fastener in the hole of the
wall lining or trunk wall cover and
push on the center until it locks
(the center is flush with the head).