Acura Integra Sedan 2000 Owner's Manual page 208

Main Menu Main Menu Table of Contents
4. Remove the socket by turning it
one-quarter turn counterclockwise.
5. If the turn signal light bulb or
tail/stoplight bulb is burned out,
remove it by pushing it in and
turning counterclockwise. If the
side marker light bulb is burned
out, remove it by pulling it straight
out of its socket.
6. Install the new bulb in the reverse
order of removal.
7. Push the socket into the light
assembly and turn it clockwise
until it locks.
8. Test the lights to make sure the
new bulb is working.
9. Install the wall lining and the trunk
wall cover and secure them with
the fasteners. Refer to page
206 for reinstallation of the
fasteners.
Removal and Reinstallation of
Fasteners
(A Type)
Removal:
Turn the center of the fastener one-
quarter turn counterclockwise using
a coin or a screwdriver. The center
will come out slightly. Then remove
the fastener.
Maintenance
Lights
CONTINUED