Brake And Clutch Fluid; Brake System - Acura Integra Sedan 2000 Owner's Manual

Main Menu Main Menu Table of Contents

Brake and Clutch Fluid

Always use Genuine Honda DOT 3
brake fluid. If it is not available, you
should use only DOT 3 or DOT 4
fluid, from a sealed container, as a
temporary replacement. However,
the use of any non-Honda brake fluid
can cause corrosion and decrease
the life of the system. Have the
brake system flushed and refilled
with Honda DOT 3 brake fluid as
soon as possible.
Maintenance
Brake fluid marked DOT 5 is not
compatible with your car's braking
system and can cause extensive
damage.

Brake System

MAX M IN
The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the M I N mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.