Acura Integra Sedan 2000 Owner's Manual page 206

Main Menu Main Menu Table of Contents
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
SCREW
1. Use a Phillips-head screwdriver to
loosen the fight assembly's
mounting screw.
2. Remove the light assembly from
the bumper.
3. Remove the socket of the burned-
out bulb from the light assembly
by turning it one-quarter turn
counterclockwise.
4. To remove the front bulb, push it
in slightly and turn it counterclock-
wise. To remove the side bulb, pull
it straight out of its socket.
5. Install the new bulb in the socket.
6. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Put the light assembly into the
bumper. Make sure the tab on the
light assembly fits into the bumper
slot. Tighten the mounting screw.
Maintenance
Lights