Acura Integra Sedan 2000 Owner's Manual page 207

Main Menu Main Menu Table of Contents
Lights
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Remove the burned-out bulb by
pulling it straight out of the socket.
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Maintenance
Replacing Rear Bulbs
(in Fenders)
A Type
1. Open the trunk.
2. Undo the six fasteners (two "A"
type and four "B" type) and
remove the trunk wall cover. Refer
to pages 205 and 206
of the fasteners.
B Type
3. Remove a "B" type fastener from
the wall lining and pull off the
lining.
for removal