Fiat Ducato Owner's Handbook Manual page 56

fig. 47
"Heat now" function fig. 47
To turn the heater on manually, press
timer button 8. The display and warning
light 1 will stay on while the heater is in
use.
Programming the heater
Before programming the heater, set the
clock.
F0N0152m
fig. 48
Setting the clock
❒ Press button 4: display and warning
light 9-fig. 48 will light up.
❒ Within 10 seconds, press button 5 or
7 to select the correct time.
When the display is turned off, the cur-
rent time will be stored.
Keeping button 5 or 7 pressed will fast
forward or backward the clock.
Reading the clock fig. 48
To read the clock, press button 4: current
time will be displayed for approximately
10 seconds. Warning light 9 will turn on.
F0N0153m
fig. 49
Programmed heating fig. 49
Heater ignition can be delayed from 1
minute to 24 hours. Three different times
can be programmed but only one will be
activated for each pre-warming cycle.
To program starting time:
❒ press button 6: either symbol 10 or
the previously programmed time and
number 3 (corresponding to the pre-
set function recalled) will light up for
10 seconds;
F0N0154m
55