How Do I Navigate The Ijet Panel Menus - Contex AB51A Operator's Manual

The iJET Panel

2.6 How do I Navigate the iJET Panel Menus?

This section explains how you find and set the many options behind the Menu button and the
Scan to button. You will learn here how menu options and values are shown in the display
window and how you use the control buttons Back, Enter and arrows up/down to reach them for
setting and changing their values.
2. When you press the one of these buttons you start its underlying menu.
Menu
or...
3. A menu contains an ordered list of menu option items and each of these menu option items
can be set to different values. Only one menu option item can be shown at a time in the
display window. When you start a menu, its first menu option item and its current value is
shown in the display window as shown below for the Menu button.
> Org. Type Color
Photo
4. A menu option that is followed by three dots (...) means that there is a sub menu that follows
when you press Enter.
>Printer Setup
...
5. The first line in the display is the menu option item and the second line is its current value. In
the example above, the current menu option item is "Org. Type Color" and its value is
"Photo". The ">" marks which one of the two lines is currently active for changing with the
arrow up/down buttons. In the example above, the first line, i.e the menu option item line is
active.
Pressing the down arrow button
menu option item and that option's own current setting as shown below:
> Org. Type B&W
Sepia
6. The ">" marker in the example above shows that the menu option item "Org, Type B&W" is
now active and "Sepia" is its current setting. To enter the menu option in order to make
changes to its setting, you press the Enter button.
In the display panel the ">" mark will move down to the next line as shown below.
Org. Type B&W
> Sepia
7. The ">" marker now indicates that the setting for "Org. Type B&W" option can be changed.
Pressing the up/down arrow buttons will move through the available settings. Press the
Enter button
Enter
selected setting will then become the option's active setting and the ">" marker will hop back
Scan to
Menu option item
Current setting for the option item
Menu option item
Three dots (...) indicate there is a submenu
in this case will move the menu forward to the next
Menu option item
Current setting for the option item
Menu option item
Current setting for the option item
when the right setting is displayed to the right of the ">" marker. The
Enter
2-6