Toshiba RAS-10SKVR-E2 Service Manual page 86

No. Part name
‚
High voltage 1) Follow to the procedure in the item
generator
2) To remove the air ionizer from the back body,
3) Disconnect the connectors of the high voltage
4) Remove the fixing screws (2 pcs) and remove
<How to assemble the high voltage generator>
1) Insert the high voltage generator straight into
2) Secure it using the fixing screws. (2 pcs)
3) Connect the connectors of the high-voltage
4) Attach the air ionizer to the back body.
Procedures
pull it toward you.
generator.
the high voltage generator from the evaporator.
the evaporator
voltage generator from the evaporator.
generat

.
– –
85
FILE NO. SVM-10029
Remarks
Connector
2 Screws
Check whether it is
completed inserted.