Name And Functions Of Indications On Remote Controller - Toshiba RAS-10SKVR-E2 Service Manual

9-4-3. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1
Transmission mark
This transmission mark
remote controller transmits signals to the indoor
unit.
2
Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool,
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
PURE indicator
Shows that the electrical air purifying operation is
in progress.
5
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
+
(LOW , LOW
HIGH
Indicates AUTO when the operating mode is
either AUTO or
10
13
1
11
12
4
7
3
indicates when the
: Dry, : Heat)
+
, MED , MED
) can be shown.
: Dry.
2 14
9
5
8
6
TIMER and clock time indicator
The time setting for timer operation or the clock
time is indicated.
The current time is always indicated except
during TIMER operation.
7
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
8
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pressed during operation.
The
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
9
ECO indicator
Indicates when the ECO is in activated.
,
Press the ECO button to start and press it again
to stop operation.
10
A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
(When the remote controller setting is "A", there is
no indication at this position.)
11
Comfort sleep
Indicates when comfort sleep is activaled.
Press comfort sleep button to selectter
12
Quiet
Indicates when quiet is activated.
Press quiet button to start and press it again to stop
operation.
13
One-Touch
Indicates when one touch comfort is activated.
Press one-touch button to start the operation.
14
Swing
Indicates when louver is swing.
Press swing button to start the swing operation
and press it again to stop the swing operation.
6
– –
46
FILE NO. SVM-10029
button.
mark is shown when holding down the