Chapter 3: Installation
The array and the display should be connected using the split pedestal cable as shown:
Split pedestal cable
(15 or 25 metres)
Power to open array
... to replace a Raymarine Pathfinder Display
Part No
E55069
Pedestal adaptor cable
To display
The array and the display should be connected using the pedestal adaptor cable as
shown:
www.busse-yachtshop.de | info@busse-yachtshop.de
Open Array
Boats DC
Power Supply
Description
2.5m Pedestal adaptor cable
To power
E-Series Display
Power to display
Note: The power supply for both the display
and the open array must be of the same
voltage (using a convertor if necessary) and
from a common supply source e.g. the same
battery or power breaker.
To open array
connector
29
PAGE
ACTIVE
WPTS
MOB
DATA
MENU
OUT
RANGE
IN
OK
CANCEL
D7329-1
D7327-1