Composite Source Type; S-Video Source Type (Not Supplied); Vga Out (Not Supplied); Seatalk2 (Not Supplied) - Raymarine E-Series Installation Manual

Chapter 3: Installation

Composite source type

Use the supplied cable to connect up to 4 composite source inputs to your E-Series
Display. The color of each connector defines the video number to which it configures
within the Video Setup Menu:
• Black - Video 1
• White - Video 2
• Red - Video 3
• Green - Video 4

S-Video source type (not supplied)

If you wish to use S-Video source type, you will need to purchase an S-Video cable (Part
no. E55062). You can connect 2 inputs using S-video to each E-Series Display. The color
of each connector defines the video number to which it configures within the Video
Setup Menu:
• Black/White - Video 1/2
• Red/Green - Video 3/4
For further information on setting up your video application, please refer to the Video
chapter of the Reference Manual.

VGA Out (not supplied)

Use this cable to connect to VGA/SVGA monitor, plasma screen television or M1500
monitor. Please ensure that any equipment that you connect conforms to the
following:
Display
E120
E80
Please refer to page 4 for details of this accessory.
Note:
2
SeaTalk (not supplied)
Use this cable to connect to third party equipment or SeaTalk
If your system networks two or more E-Series displays, you should ensure that the
SeaTalk 2 connection is made to the display that you have defined as your master unit.
Please refer to page 4 for details of this accessory.
Note:
www.busse-yachtshop.de | info@busse-yachtshop.de
Resolution Refresh rate
800 x 600 56 Hz
640 x 480 60 Hz
27
2
instruments.