Routing - D-Link DIR-615 User Manual

Section 3 - Configuration
This option allows you to define fixed routes to defined destinations.
Tick this checkbox to enable or disable fixed
Enable:
routes to defined destinations.
Use the drop-down menu to choose the WAN or
Interface:
WAN (Physical Port) Interface the IP packet must
use to transit out of the Router.
Destination:
The IP address of the packets that will take this
route.
Subnet Mask:
The subnet of the IP address of the packets that
will take this route.
Gateway: Specifies the next hop to be taken if this route is
used.
D-Link DIR-615 User Manual

Routing

38