Using for the first time
WARNING! Read "Safety Information" on page 3 before installing, powering, operating or servicing
the MAC 350 Entour.
Before applying power to the fixture:
• Check the Martin Professional website at www.martin.com for the most recent software, user
documentation, technical information and product specifications for the MAC 350 Entour. Martin user
manual revisions are identified by the letter at the bottom of page 2.
• Carefully review "Safety Information" on page 3.
• Check that the fixture's power voltage and frequency range indicated on the serial number label match the
local AC power source.
• If drawing power from a socket, install a suitable power plug on the power cable as described in "Power
cable and plugs" on page 9.
Connections panel
A
D
8
B
E
Figure 1: Connections panel overview
MAC 350 Entour user manual
A – Fuseholder, mains fuse 1
B – Fuseholder, mains fuse 2
C – AC mains power input
(Neutrik PowerCon)
D – DMX out (5-pin female XLR)
C
E – DMX in (5-pin male XLR)